My Cart: 0 item(s)
Description
Reviews
Video
Bike Fitment
Description
Wrist Pin Press Tool
This is a great tool for removing the piston wrist pin of just about any engine, and as far as BMW motorcycles are concerned, especially useful on all pre 1981 models with an internal circlip. Without a tool like this, if can be difficult to remove the wristpins without the potential for damage. It is never a good idea to tap the wrist pin out.
The tool is supplied with 5 bushings with the following diameters: 13.0, 15.0, 16.0, 19.0, and 22.0 mm
- Select the proper bushing
- After removing the circlips, insert the spindle through the wrist pin
- Secure the bushing with the supplied knurled nut
- Turn the spindle until to remove all slack and position the tool
- Continue to turn the spindle with a wrench and the wrist pin is drawn into the tool with no damage or strain to the piston rod or bearing.
Customers Who Bought This Product Also Bought
Reviews
Write a review
5
1
0
0
0
AJ | July 30th, 2020
A must have if ever removing the cylinders. I used this tool with no issues removing the cylinders to replace pushrod tubes and seals while the engine is on the bike. This tool was used in the removal and the installation of the wrist pins. It could also be used on other motors. I suggest to watch his videos on proper use.
