My Cart: 0 item(s)

Krauser Classic Replacement Lid Lock
    Purchase Krauser Classic Replacement Lid Lock
    • Part # 4654117
      Krauser Classic Replacement Lid Lock

    • ★★★★★ ★★★★★
    • $84.95

    • In Stock
      Caution! Our Krauser Classic Replacement Lid Lock does not fit all bike models. Please select your bike if you are not sure.

       

    -
    Write a Review
    Description Reviews Bike Fitment

    Description


    Krauser Classic Replacement Lid Lock


    Replacement lid lock for Krauser Classic Cases. This lock can also be used instead as a replacement for the no longer available SUDHAUS locks, or "top-click locks" that were used on early Original BMW and Krauser cases.

    When installing these locks as a replacement for the older style, a small modification to the bag is required: A suitably sized hole must be drilled to accommodate the lock cylinder (protrusion at bottom can be seen in image above) and this should then be sealed (e.g. with silicone).

    • Sold individually
    • Can be fitted to right or left side case
    • Mounting holes are 66mm apart

    Reviews
    Write a review

    Currently Viewing Reviews with a rating of 3. Click here to reset.
    ★★★★★ ★★★★★
    3/5 Stars out of 3 Reviews
    5
    1
    4
    0
    3
    1
    2
    0
    1
    1
    WORKED - WITH A CAVEAT
    (EVERYWHERE) | July 2nd, 2023
    While I did get these latches installed, they are definitely NOT plug and play. While they warn you a new hole must be drilled for the lock tumbler, they don't tell you the other mounting holes don't line up with the rivets you drilled out on the old latch. One is close, so you can slot it a bit, but the other one is not even close. A template would make this easier, but none is supplied (or any instructions). If all these holes don't line up just about perfect the lid edge won't seat into the sealing gasket on the other side, so it doesn't close far enough to latch. Plan to enlarge and shift holes a bit, because even with careful measuring it is still a bit of trial and error. Possible, yes, definitely not easy. There aren't any other real options that I'm aware of, so I made it work. Still better than buying new bags, or installing another set of used latches.
    Write Review:
    Krauser Classic Replacement Lid Lock
    • Click/Tap a star to rate. 5 stars is the best.
    • All fields are required except "where you're from".
    • Your email is for verification purposes only and will NOT be published or shared. See our Privacy Policy.

    Thank you for your review!

    Enter only the red text:  3Ry33361Arq!


    Essential Tools





    Bike Fitment


    R50-5

    1970 · 1971 · 1972 · 1973

    R60-5

    1970 · 1971 · 1972 · 1973

    R75-5

    1970 · 1971 · 1972 · 1973

    R60-6

    1974 · 1975 · 1976

    R75-6

    1974 · 1975 · 1976

    R90-6

    1974 · 1975 · 1976

    R90 S

    1974 · 1975 · 1976

    R60-7

    1976 · 1977

    R75-7

    1976 · 1977

    R100-7

    1976 · 1977 · 1978

    R100 RS

    1976 · 1977 · 1978 · 1979 · 1980 · 1981 · 1982 · 1983 · 1984 · 1988 · 1989 · 1990 · 1991 · 1992 · 1993

    R100 S

    1976 · 1977 · 1978 · 1979 · 1980

    R80

    1977 · 1978 · 1979 · 1980 · 1985 · 1986 · 1987

    R45

    1978 · 1979 · 1980 · 1981 · 1982 · 1983 · 1984 · 1985

    R65

    1978 · 1979 · 1980 · 1981 · 1982 · 1983 · 1984 · 1985 · 1986 · 1987

    R100-T

    1978 · 1979 · 1980 · 1981 · 1982 · 1983 · 1984

    R100 RT

    1978 · 1979 · 1980 · 1981 · 1982 · 1983 · 1984 · 1988 · 1989 · 1990 · 1991 · 1992 · 1993 · 1994 · 1995

    R100 CS

    1980 · 1981 · 1982 · 1983 · 1984

    R65 LS

    1981 · 1982 · 1983 · 1984

    R80 RT

    1982 · 1983 · 1984 · 1985 · 1986 · 1987

    Sign Up For Our Newsletter