Part # 361984
Joost Elektronikbox Version T

Electronic box version T - the tinkerers of Axel Jost were long thinking about how a control module for all important functions on the bike with only 2 buttons can be operated intuitively, without having to learn complicated key combinations. The result is this ingeniously simple solution. The T-Box (T stands for tricky) controls the following functions:

• Turn signal, the flashing frequency is of course load independent.
• Adjustable turn signal reset and dimming function of turn signals (low light)
• Control of high and low beam
• Control of starter relay and ignition.
• Control of the horn
• Control of brake lights incl. Option for dimming function and flasher function
• Control LED's at the outputs for easier monitoring of the functions
• The neutral - and the side stand switch can be interrogated for the function of the starter and the ignition.
• An output for the turn signal control in the speedometer is available.
• The outputs are short-circuit proof and self-resetting

The practical programming allows the box to be used very intuitively. Therefore, no button combinations need to be memorized by the user:

• A short press on one of the two buttons switches the respective turn signal on. Another short press on one of the two buttons switches it off again.
• A slightly longer press and hold (over about 0.3 seconds) left switches the horn
• A slightly longer press and hold (for about 0.3 seconds) right switches the starter
• Two short button presses on the left side switch between high and low beam
• Two short button presses on the right side turn the ignition on - or off
• A short press on both buttons at the same time switches on the hazard warning lights

The T-Box can also be used for Harley Davidson motorcycles with a TSM/TSSM module to control the module, if you connect the button inputs from the TSM/TSSM module to the turn signal outputs of the T-Box. A combination with the existing alarm system is thus possible without further ado.

Specifications:

• Dimensions: 50 mm length x 12.5 mm width x 42 mm height
• Current consumption: Maximum 7mA at 12V
• Housing: Black impact-resistant ABS plastic, waterproof encapsulated
• Input voltage: 7 - 18 volts
• Connections: Control section 0.14mm², power section 0.75 mm², 1.5 mm² for supply cable, 20 cm each
• Maximum output current: 5 amps f. High/low beam, 3 amps the other outputs
• Maximum ambient temperature: 80 degrees Celsius
• Allowable current from 12V connection: 20 amps